berhasil ditambahkan ke keranjang.
  • ADT 209/210 Loop Calibrator (69.230769230769%)

    ADT 209/210 Loop Calibrator

ADT 209/210 Loop Calibrator

  Accuracy to 0.01% of reading
• Measure, source, or simulate loop current
• Measure DC volts
• Simultaneously mA and % span display
• Switch functionality
• Selectable ramp and step functions
• HART 250Ω resistor in series with 24V loop

   homepage | | contact us data-sheet Catalog | Manual Video pdf |    


The ADT209 and ADT210 allow for measurement of current, voltage and a switch. You can also simulate or source mA or a process transmitter. With a push of a button, you can switch to zero and span values, auto ramp, and auto step throughout the range.


General Specifications
Voltage limit:30V between terminals or between terminals and ground
Measurement Functions: Auto step, auto ramp, span step
Display VA LCD display:2.04 x 2.04 in (52 x 52 mm)
Loop power: 24V
Over-voltage protection:30V DC (240V AC)
Overload current protection: 33mA DC
Storage temperature:-20°C to 70°C
Working Environment: -10 to 50°C, 95%RH
Working Altitude: <3,000 m
Vibration/shock:Random 2G 5 to 500Hz, 1 meter drop
Power:One 9V alkaline battery (ANSI/NEDA 1604A or IEC)
       DC9V optional adapter available
Battery life (typical): Output mode: 18 hours (12 mA/500Ω)
Measure mode: 50 hours
Size (LxWxH):163 x 83 x 41 mm
Weight:350 g
Calibration Certification:NIST-traceable certificate of calibration with data
Compliance Certification:ADT209: CSA, CE, DNV
                                           ADT210: CSA, CE, DNV 
Warranty: 3 years